Best Quality Minimize noises wireless cordless mic
Receiver Parameter
| Main Frame Size | EIA-Standard 19" 1U |
| Channels | Dual Channel |
| Frequency Stability | ±0.005%, Phase Lock Loop frequency control |
| Carrier Frequency Range | UHF 510-937 MHz ( country dependent ) |
| Preset Channels | 32 preset channels |
| Operating Range | 90M typical ( in open space) |
| Oscillation | PLL synthesized |
| Sensitivity | 6dBμV, S/N>60dB at 25 deviation |
| Band Width | 30MHz |
| Max. Deviation Range | ±45KHz |
| S/N | ＞105dB |
| T.H.D. | ＜0.7% @ 1KHz |
| Frequency response | 45Hz～18KHz±1dB |
| Squelch | “PiloTone & NoiseLock” dual-squelch circuit |
| Power Supply | 100-240V/AC50/60 Hz, 10W |
| Weight | 2KG |
| Dimension | 482(W) X 454(H) X 186(D) (mm) |
| Output Connector | XLR balanced & 6.3φ phone jack unbalanced |
Transmitter Parameter (Handheld)
| Carrier Frequency Range | UHF 510-937 MHz ( country dependent ) |
| Oscillation | PLL synthesized |
| Harmonic radiation | ＜-63dBm |
| Bandwidth | 120MHz |
| Max. Deviation Range | ±45KHz |
| Input Connector | 4-pin mini-XLR connector |
| RF Power Output | 3～30mW ( country dependent ) |
| Battery | AA X 1 alkaline |
| Current Consumption | 60mA, typical |
| Battery Current / Life | Min. 5 hours |
| Dimension | 72(H) X 68(W) X 21(D) (mm) |
| Weight | 71g ( w/o battery) |
Receiver Features
· Rugged metal chassis with soft-touch controls.
· Advanced diversity technology maintains dependable wireless
signal quality.
· Pilot tone squelch for eliminating RF interference when
transmitter is turned off.
· Enhanced AF frequency range
· Built-in spectrum analyzer to scan and display interference
frequency clearly.
· Transmitter Sync.
· 600 selectable frequencies across 30MHz bandwidth.
· OLED display screen delivers a bright, clear viewing in day/night
environments.
· Equipped with both XLR balanced and Ø6.3mm unbalanced outputs.
· Offers an exceptional value in both performance and price, for
both working musicians and sound installers
Transmitter Features
· Rugged, ergonomically designed housing.
· 120MHz ultra-wide bandwidth.
· Equipped with 4 pin mini XLR connector.
· Infrared automatic transmitter sync.
· Very easy and quick to use thanks to OLED display
· 1 x AA batteries – up to 5 hours continue use.
Products Supply Scope
. Handheld system: 1* AM 100 receiver + 2* AH 100 handheld
microphones
. Lavalier system: 1* AM 100 receiver + 2* AP 100 bodypack
transmitters with lavalier microphone
. Headset system: 1* AM 100 receiver + 2* AP 100 bodypack
transmitters with headset microphone
. 1 power supply unit
. 2 antennas
. 1 ¼” (6.3 mm) audio connecting cable
. 4 AA size batteries ( handheld system ) / 2 AA size batteries (
lavalier / headset system )
. Operating instructions.
Application
Suitable for Large-scale performances ,small and medium-sized
performances, outdoor singing and speeches, KTV boxes, classrooms,
gymnasiums, offices and government agencies
Welcome to our company ,a one-stop solution for your Microphone
business
Below the grille, it's a fairly straightforward USB mic build, with
a gain knob (that also acts as a mute button) and three multicolor
status LEDs above it. There's a 3.5mm headphone jack and a USB port
on the bottom panel. As with the MiC Plus, some might find the
large logos and fonts on the front face a tad cheesy—compared with
the Blue Raspberry it looks less elegant—but from an operational standpoint, all of
the plastic buttons and knobs are easy to use.
The Blend button on the front face of the mic allows you to adjust
mix levels, shifting in various degrees from more mic signal to
more playback signal from your recording software. (This same
feature is also on the MiC Plus). The status LEDs become level
indicators when adjusting gain—they flash red when the signal
peaks. Adjusting the gain is as simple as turning the knob on the
front face of the mic.
